Gourd Rail for Mini Mini Train : Yoshiaki Ishikawa Railway Track 9mm Gauge N(1:150)
Yoshiaki Ishikawa Gourd-shaped ultra-steep curve, ultra-small rail N (1/150) size About c1cm human height
Rail dimensions: approx. 20 cm x 10 cm (outer diameter), approx. 16 cm x (4-6) cm (inner diameter)
Note: In practice, it is necessary to place buildings and other models in an area further away from the tracks to prevent the vehicles from hitting them when running.
Note Track width: 9mm (sleeper pitch: N)
[Caution]
The curved section is a curved rail with a very small radius. Due to the hand-worked nature of the product, there is some distortion.
Due to the steepness of the curve and the fact that rail powering is not considered, this product is not intended to be used with anything other than a battery-powered miniature train.
If the batteries are low, the train may slow down and stop at bends. If the train runs slowly, please replace the button battery.
The vehicles and photographic accessories shown in the photos are combination images and are not included in the product.
Information edited by Sakatsu Gallery
The flexible rail was bent by Mr. Ishikawa himself to make a gourd-shaped bend into a very small rail.
The compact horizontal size fits perfectly into the "Collection Box Arch Deep Type" from Daiso.
You're welcome to try your hand at making your own super-small, adorable, fantastic diorama!
Caution]
The curve part is a curve rail of extremely small radius.
The curves are very small in radius.
Due to the steepness of the curve and the fact that rail powering is not considered, this product is not intended to be used with anything other than a battery-powered miniature train.
If the batteries are low, the miniature train may slow down and stop at the bends. If the speed is too slow, please replace the button battery.
The cars and photographic accessories in the picture are combination images and not included in the product.
There are also other works by Yoshiaki Ishikawa
Please take a look at our website.
Rail dimensions: approx. 20 cm x 10 cm (outer diameter), approx. 16 cm x (4-6) cm (inner diameter)
Note: In practice, it is necessary to place buildings and other models in an area further away from the tracks to prevent the vehicles from hitting them when running.
Note Track width: 9mm (sleeper pitch: N)
[Caution]
The curved section is a curved rail with a very small radius. Due to the hand-worked nature of the product, there is some distortion.
Due to the steepness of the curve and the fact that rail powering is not considered, this product is not intended to be used with anything other than a battery-powered miniature train.
If the batteries are low, the train may slow down and stop at bends. If the train runs slowly, please replace the button battery.
The vehicles and photographic accessories shown in the photos are combination images and are not included in the product.
Information edited by Sakatsu Gallery
The flexible rail was bent by Mr. Ishikawa himself to make a gourd-shaped bend into a very small rail.
The compact horizontal size fits perfectly into the "Collection Box Arch Deep Type" from Daiso.
You're welcome to try your hand at making your own super-small, adorable, fantastic diorama!
Caution]
The curve part is a curve rail of extremely small radius.
The curves are very small in radius.
Due to the steepness of the curve and the fact that rail powering is not considered, this product is not intended to be used with anything other than a battery-powered miniature train.
If the batteries are low, the miniature train may slow down and stop at the bends. If the speed is too slow, please replace the button battery.
The cars and photographic accessories in the picture are combination images and not included in the product.
There are also other works by Yoshiaki Ishikawa
Please take a look at our website.
