Western-style House : Takumi Diorama Craft House - Pre-Painted HO (1:80)
Takumi Diorama Craft House, painted and finished, 1/80 size
Measurements: W:105mm, D:95mm, H:100mm (including weathervane)
Base kit: Sankei's "Western-style building-1"
Note: 9 CRD-controlled LED lights are already decorated. 4 lights on the ground floor and 5 lights on the first floor are placed in each room. Of course, CRDs (constant current diodes) are already installed.
The leads are slightly thicker and longer for ease of construction, making it easy to integrate into your layout or diorama. The voltage range is from 3V to 16V. The soldered parts of the wiring are insulated with heat shrink tube to prevent short circuit.
Information edit: Sakatsu Gallery
This is the finished work of "Western-style house-1" made by Sankei. While taking advantage of the calm atmosphere of the kit, it has been modified inside and out to create a work full of originality.
The first thing you will notice is the roof. The kit was only printed, but we carved the roof to create a base, and then added a 3D effect by smearing and dry brushing. This is the first time we've done this.
The addition of the guttering, which has become a standard feature, was done using 0.7mm brass wire for the vertical guttering for sharpness. By placing the gutters at each corner of the building, and choosing a dark green paint to match the roof, a crisp and tight effect was created in a building that had been covered in light colours.
The main entrance and the side stairs were carefully modified. I used melted putty and surfacer to prepare the surface. The surface was sprayed with a light coat of suede to give it a textured look.
The interior was not left untouched either, with the addition of a wooden floor separating the first and first floors, which had been vaulted. Each of the rooms that have been created has been fitted with light bulb LEDs, so that the beautiful silhouette of the window frames emerges in the night view.
Measurements: W:105mm, D:95mm, H:100mm (including weathervane)
Base kit: Sankei's "Western-style building-1"
Note: 9 CRD-controlled LED lights are already decorated. 4 lights on the ground floor and 5 lights on the first floor are placed in each room. Of course, CRDs (constant current diodes) are already installed.
The leads are slightly thicker and longer for ease of construction, making it easy to integrate into your layout or diorama. The voltage range is from 3V to 16V. The soldered parts of the wiring are insulated with heat shrink tube to prevent short circuit.
Information edit: Sakatsu Gallery
This is the finished work of "Western-style house-1" made by Sankei. While taking advantage of the calm atmosphere of the kit, it has been modified inside and out to create a work full of originality.
The first thing you will notice is the roof. The kit was only printed, but we carved the roof to create a base, and then added a 3D effect by smearing and dry brushing. This is the first time we've done this.
The addition of the guttering, which has become a standard feature, was done using 0.7mm brass wire for the vertical guttering for sharpness. By placing the gutters at each corner of the building, and choosing a dark green paint to match the roof, a crisp and tight effect was created in a building that had been covered in light colours.
The main entrance and the side stairs were carefully modified. I used melted putty and surfacer to prepare the surface. The surface was sprayed with a light coat of suede to give it a textured look.
The interior was not left untouched either, with the addition of a wooden floor separating the first and first floors, which had been vaulted. Each of the rooms that have been created has been fitted with light bulb LEDs, so that the beautiful silhouette of the window frames emerges in the night view.
