Square 100 Rail for Mini Mini Train : Yoshiaki Ishikawa Railway Track 9mm Gauge N(1:150)
Yoshiaki Ishikawa Right-angled, ultra-rapid curves, ultra-small rail N (1/150) size About c1cm human height
Rail dimensions: approx. 12cm x 12cm (outer diameter), approx. 8cm x 8cm (inner diameter)
Note: In practice, it is necessary to place the building or other model in an area further away from the track to prevent the vehicle from hitting it when running.
Note Track width: 9mm (sleeper pitch: N)
[Caution]
The curved part is a curved rail with a very small radius. Due to the hand-worked nature of the product, there is some distortion.
Due to the steepness of the curve and the fact that rail powering is not considered, this product is not intended to be used with anything other than a battery-powered miniature train.
If the batteries are low, the train may slow down and stop at bends. If the train runs slowly, please replace the button battery.
The vehicles and photographic accessories shown in the photos are combination images and are not included in the product.
Information edit: Sakatsu Gallery
The flexible rail has been bent by Mr. Ishikawa himself into a very small rail that bends like a square.
The rails are supplied simply as rails, so you can dig into a part of your diorama base to make a river and let your diorama cross over it.
You're welcome to try your hand at making a super small, lovely, fantastic diorama!
Caution]
The curved part is a curved rail with an extremely small radius. Due to the hand-made nature of the product, there is some distortion.
Due to the steepness of the curve and the fact that rail powering is not considered, this product is not intended to be used with anything other than a battery-powered miniature train.
If the batteries are low, the miniature train may slow down and stop at the bends. If the speed is too slow, please replace the button battery.
The cars and photographic accessories in the picture are combination images and not included in the product.
There are also other works by Yoshiaki Ishikawa
Please take a look at our website.
Rail dimensions: approx. 12cm x 12cm (outer diameter), approx. 8cm x 8cm (inner diameter)
Note: In practice, it is necessary to place the building or other model in an area further away from the track to prevent the vehicle from hitting it when running.
Note Track width: 9mm (sleeper pitch: N)
[Caution]
The curved part is a curved rail with a very small radius. Due to the hand-worked nature of the product, there is some distortion.
Due to the steepness of the curve and the fact that rail powering is not considered, this product is not intended to be used with anything other than a battery-powered miniature train.
If the batteries are low, the train may slow down and stop at bends. If the train runs slowly, please replace the button battery.
The vehicles and photographic accessories shown in the photos are combination images and are not included in the product.
Information edit: Sakatsu Gallery
The flexible rail has been bent by Mr. Ishikawa himself into a very small rail that bends like a square.
The rails are supplied simply as rails, so you can dig into a part of your diorama base to make a river and let your diorama cross over it.
You're welcome to try your hand at making a super small, lovely, fantastic diorama!
Caution]
The curved part is a curved rail with an extremely small radius. Due to the hand-made nature of the product, there is some distortion.
Due to the steepness of the curve and the fact that rail powering is not considered, this product is not intended to be used with anything other than a battery-powered miniature train.
If the batteries are low, the miniature train may slow down and stop at the bends. If the speed is too slow, please replace the button battery.
The cars and photographic accessories in the picture are combination images and not included in the product.
There are also other works by Yoshiaki Ishikawa
Please take a look at our website.
