Cord 40 rail 3 ft (90 cm): micro engineering material 16-040
Material made by Micro Engineering, non-scale
The rails are very thin (approx. 1 mm) and have some distortion. It requires a lot of skill to lay and is suitable for advanced users.
Supplied in packs of 1 x 90cm. When used as a rail, it can be divided into two pieces for a total of 45 cm.
If you buy more than 10 bottles at a time, we will pack them in their original length (approx. 90 cm).
If you buy between 1 and 9 pieces, we will cut them in half (approx. 45 cm) with nippers.
Please note that this is due to the product being very thin and prone to breakage.
Material: Nickel silver
This product has been weathered and has a dark metallic sheen.
The photos are pre-assembled and painted examples, pedestals, cars and rails are not included.
Information edit: Sakatsu Gallery
This is a very thin and delicate rail, about 1.1 mm high and 1.0 mm wide. Due to its very thinness, a perfectly straight line is not produced.
For use on HO Narrow (HOn2 1/2, gauge 9mm) light railways, we recommend the Classic Story sleeper set<, which is sold separately.
For use on HO Narrow (HOn2, 6.5mm gauge) light railways, we recommend the Classic Story Sleeper Set< which is sold separately.
When laying, the sleepers can be glued to the sleepers using a wood bond such as Tightbond. Please crimp firmly until dry.
For a more realistic spike, we recommend the optional Special Spike.
To connect the rail, use the optional Joiner.
The rails are very thin (approx. 1 mm) and have some distortion. It requires a lot of skill to lay and is suitable for advanced users.
Supplied in packs of 1 x 90cm. When used as a rail, it can be divided into two pieces for a total of 45 cm.
If you buy more than 10 bottles at a time, we will pack them in their original length (approx. 90 cm).
If you buy between 1 and 9 pieces, we will cut them in half (approx. 45 cm) with nippers.
Please note that this is due to the product being very thin and prone to breakage.
Material: Nickel silver
This product has been weathered and has a dark metallic sheen.
The photos are pre-assembled and painted examples, pedestals, cars and rails are not included.
Information edit: Sakatsu Gallery
This is a very thin and delicate rail, about 1.1 mm high and 1.0 mm wide. Due to its very thinness, a perfectly straight line is not produced.
For use on HO Narrow (HOn2 1/2, gauge 9mm) light railways, we recommend the Classic Story sleeper set<, which is sold separately.
For use on HO Narrow (HOn2, 6.5mm gauge) light railways, we recommend the Classic Story Sleeper Set< which is sold separately.
When laying, the sleepers can be glued to the sleepers using a wood bond such as Tightbond. Please crimp firmly until dry.
For a more realistic spike, we recommend the optional Special Spike.
To connect the rail, use the optional Joiner.
