Thick Floor Type Coal Feeder & Water Column : Kobo-Nanarokuni Finished product model 1:80(HO) 1036
Pre-painted 1/80 size (HO) by Kobo NANA ROKUNI
Original (self-made full-scratch) work
Coal feeder: Prototype modeled after the one that once existed at Atsutoko Station on the Shibetsu Line in Hokkaido
. The spout: also from Atsutoko, made by myself.
�@�@�@�@�@ It can be set up independently and freely, and the axis can be rotated and the water tube can be moved up and down (back and forth) to some extent to recreate water supply scenes
. Size: Carrying stand: approx. W 170 x D 50 x H 72 mm
�@�@�@�@Transport: approx. W 44 x D 17 x H 73 mm
. Note: 2 LED lamps with CRD
. Appropriate voltage: 3 to 12 V DC "with connector for power supply"
Information edit: Sakatsu Gallery
We are pleased to announce the release of the first of our two new products, the first of which is a steam-era layout/section, featuring a full scratch-built "Koubou Nanarokuni" coal feeder and water column.
This is a prototype of the one that was once used at Atsutoko Station on the Shibetsu Line in Hokkaido.
The coal supply platform is of the covered snowfall type, with a masonry base and diagonal planking.
The model has been arranged to reduce the overall length slightly to reduce the feeling of being too long.
The lighting is two LED bulbs with CRD.
3 to 12 volts DC is available.
3 to 12 volts DC, with power connector.
The water supply pole is also based on the prototype found at Atsutoko station in Nezu.
It can be set up independently and freely, the axis can be rotated and the water supply tube can be adjusted upwards and downwards (backwards and forwards) to a certain extent, allowing you to enjoy the water supply scene.
The column can be rotated by adjusting the screws from the back.
Original (self-made full-scratch) work
Coal feeder: Prototype modeled after the one that once existed at Atsutoko Station on the Shibetsu Line in Hokkaido
. The spout: also from Atsutoko, made by myself.
�@�@�@�@�@ It can be set up independently and freely, and the axis can be rotated and the water tube can be moved up and down (back and forth) to some extent to recreate water supply scenes
. Size: Carrying stand: approx. W 170 x D 50 x H 72 mm
�@�@�@�@Transport: approx. W 44 x D 17 x H 73 mm
. Note: 2 LED lamps with CRD
. Appropriate voltage: 3 to 12 V DC "with connector for power supply"
Information edit: Sakatsu Gallery
We are pleased to announce the release of the first of our two new products, the first of which is a steam-era layout/section, featuring a full scratch-built "Koubou Nanarokuni" coal feeder and water column.
This is a prototype of the one that was once used at Atsutoko Station on the Shibetsu Line in Hokkaido.
The coal supply platform is of the covered snowfall type, with a masonry base and diagonal planking.
The model has been arranged to reduce the overall length slightly to reduce the feeling of being too long.
The lighting is two LED bulbs with CRD.
3 to 12 volts DC is available.
3 to 12 volts DC, with power connector.
The water supply pole is also based on the prototype found at Atsutoko station in Nezu.
It can be set up independently and freely, the axis can be rotated and the water supply tube can be adjusted upwards and downwards (backwards and forwards) to a certain extent, allowing you to enjoy the water supply scene.
The column can be rotated by adjusting the screws from the back.
