Small Turntable : Takumi Diorama Craft House - Pre-Painted HO(1:80) 1031
Takumi Diorama Craft House, 1/80 size, pre-painted, 16.5mm gauge
Measurements: Base width: 132mm, Base length: 132mm, Required depth under base: 42mm, Length of girder: 116mm (same for track length on girder)
Note:
The electrical system has a lag board between the main unit and the control panel to allow for easy adjustment of the position of the control panel, this can be used to lengthen or shorten the lead wires.
As the direction of rotation of the digits is constant, a terminal block has been added to the circuit to allow easy reversal of polarity by screwing, i.e. reverse rotation.
However, in case of misalignment, you can remove the crossing board (attached with double-sided adhesive tape) from the track. However, in case of misalignment, it is possible to remove the crossing board (attached with double-sided tape with low adhesive strength) and make minor adjustments with the two screws between the sleepers.
4. The track is #70 as recommended by the manufacturer.
Information edit: Sakatsu Gallery
This is a special finished product assembled from a kit from the M's Collection.
The weathering is of course in the Takumi Diorama Craft House style.
This is the first time we have seen this type of turntable in the UK. This is the first time we have seen a steam locomotive on the turntable.
In the 1960s and 1970s, a number of railways in the UK were forced to close their doors to the public.
This is an example of a model that has been around for a long time and is still in use.
Measurements: Base width: 132mm, Base length: 132mm, Required depth under base: 42mm, Length of girder: 116mm (same for track length on girder)
Note:
The electrical system has a lag board between the main unit and the control panel to allow for easy adjustment of the position of the control panel, this can be used to lengthen or shorten the lead wires.
As the direction of rotation of the digits is constant, a terminal block has been added to the circuit to allow easy reversal of polarity by screwing, i.e. reverse rotation.
However, in case of misalignment, you can remove the crossing board (attached with double-sided adhesive tape) from the track. However, in case of misalignment, it is possible to remove the crossing board (attached with double-sided tape with low adhesive strength) and make minor adjustments with the two screws between the sleepers.
4. The track is #70 as recommended by the manufacturer.
Information edit: Sakatsu Gallery
This is a special finished product assembled from a kit from the M's Collection.
The weathering is of course in the Takumi Diorama Craft House style.
This is the first time we have seen this type of turntable in the UK. This is the first time we have seen a steam locomotive on the turntable.
In the 1960s and 1970s, a number of railways in the UK were forced to close their doors to the public.
This is an example of a model that has been around for a long time and is still in use.
