Coin cell CR2032 constant light board : KEIGOO Electronic parts Non-scale 99020 "Sales start campaign Special price 660 yen! Special price 660 yen (regular price 990 yen)
KEIGOO Electronic Parts Non-scale
Attention
LEDs are sold separately. Please use in combination with our "bulb color, white, blue, green, yellow-green" with chip LED connectors.
For "Red, Yellow, Orange (2V lighting)" type, please turn down the brightness control volume to light up, otherwise the LEDs may be damaged or cause a fire.
Use a precision Phillips screwdriver or similar tool to slowly turn the brightness control knob.
The LED brightness can be infinitely adjusted from maximum to 20% of the light intensity with a range of motion of almost half a turn.
Note: Turning beyond the range of motion will damage the product.
Number of LED connection terminals 2
Approximate body size
Width 33 mm X Depth 33 mm X Thickness 8 mm
Uses 1 coin cell CR2032 battery (1 test battery included)
Putting tape on the coin cell battery makes it easier to take it out.
Information editing: Sakatsu Gallery
Beginner-friendly, no soldering required!
Easy connection by simply plugging in the connector.
of the same function.Coin Cell Battery CR1220 Permanent Light BoardThe battery lasts longer than the If you want to reduce the installation space, the area is about half the size of theCoin Cell Battery CR1220 Permanent Light Boardis recommended.
The power supply for LEDs "Coin Cell Battery CR2032 Always-On Board" is a battery holder for incorporating into dioramas, dollhouses, plastic models, and other small spaces to keep the LEDs always on.
It has a brightness adjustment volume so you can adjust the brightness to your preference.
If you want to flash the LED, please combine it with the "Ultra-compact Controller" (sold separately).
recommended ultra-compact controller
candlelike
Genji-Botaru like(species of firefly)
Heike-Botaru like(species of firefly)
Flicker 0.5/0.5
Flicker 1.0/1.0
Aeronautical Obstacle Light
Aeronautical Obstacle Light 2
recommended LEDs
1.6x0.8mm chip LED, bulb color, with connector
1.6x0.8mm chip LED, white, fluorescent color, with connector
1.6x0.8mm chip LED, red, with connector
1.6x0.8mm chip LED yellow with connector
1.6x0.8mm chip LED, green, with connector
1.6x0.8mm chip LED, blue, with connector
Other KEIGOO products
Attention
LEDs are sold separately. Please use in combination with our "bulb color, white, blue, green, yellow-green" with chip LED connectors.
For "Red, Yellow, Orange (2V lighting)" type, please turn down the brightness control volume to light up, otherwise the LEDs may be damaged or cause a fire.
Use a precision Phillips screwdriver or similar tool to slowly turn the brightness control knob.
The LED brightness can be infinitely adjusted from maximum to 20% of the light intensity with a range of motion of almost half a turn.
Note: Turning beyond the range of motion will damage the product.
Number of LED connection terminals 2
Approximate body size
Width 33 mm X Depth 33 mm X Thickness 8 mm
Uses 1 coin cell CR2032 battery (1 test battery included)
Putting tape on the coin cell battery makes it easier to take it out.
Information editing: Sakatsu Gallery
Beginner-friendly, no soldering required!
Easy connection by simply plugging in the connector.
of the same function.Coin Cell Battery CR1220 Permanent Light BoardThe battery lasts longer than the If you want to reduce the installation space, the area is about half the size of theCoin Cell Battery CR1220 Permanent Light Boardis recommended.
The power supply for LEDs "Coin Cell Battery CR2032 Always-On Board" is a battery holder for incorporating into dioramas, dollhouses, plastic models, and other small spaces to keep the LEDs always on.
It has a brightness adjustment volume so you can adjust the brightness to your preference.
If you want to flash the LED, please combine it with the "Ultra-compact Controller" (sold separately).
recommended ultra-compact controller
candlelike
Genji-Botaru like(species of firefly)
Heike-Botaru like(species of firefly)
Flicker 0.5/0.5
Flicker 1.0/1.0
Aeronautical Obstacle Light
Aeronautical Obstacle Light 2
recommended LEDs
1.6x0.8mm chip LED, bulb color, with connector
1.6x0.8mm chip LED, white, fluorescent color, with connector
1.6x0.8mm chip LED, red, with connector
1.6x0.8mm chip LED yellow with connector
1.6x0.8mm chip LED, green, with connector
1.6x0.8mm chip LED, blue, with connector
Other KEIGOO products
