MR150-308 Flat LED Signal Kit : MATSURI MODELS Unpainted Kit N (1:150)

Unpainted kit by MATSURI MODELS 1:150 size

Set Contents
Signal main body (3 sets): 10.0mm(W) x 3.5mm(H) x 0.6mm(D) x 12 pieces
Signal main body (1 series)::3.5mm (width) x 3.5mm (height) x 0.6mm (depth) x 8 pieces
Pedestrian signal (long): 21.0 mm long X 2 each of 2 types
Pedestrian signals (short): 11.0 mm long X 2 each of 2 types
Connecting joint X 6 pcs.
Attachment for vertical installation X 2 pcs
Signal lenses (normal) X 30
Lens for signal (arrow) X 20 pieces
Signal pole: Height 50.0mm + insert 2.0mm x 4 pcs.

Note: This is an imitation of an LED signal and does not have the ability to light up.

The photo shows an assembled and painted example.
This product is unpainted with support for 3D printing.
Separate from the support and paint before use.

Caution
When detaching the support, use nippers that can cut well and carefully detach the support so as not to put a load on the body of the part.
When painting, use a primer or similar primer to prepare the surface.
The parts may be deformed or damaged by high temperatures or ultraviolet rays. Store and use the product away from high temperatures and sunlight.

Information editing: Sakatsu Gallery

These are scenery parts from MATSURI MODELS, a garage manufacturer focusing on parts for model trains.
3Recreate familiar landscapes with delicate, realistic parts made with a 3D printer.

The industry's first (?) This is the industry's first (?) commercially available kit of flat LED traffic signals!
Note: It mimics an LED traffic light and does not have the ability to light up.
The hood is designed to be extremely thin, and the lens is a separate part to reproduce the LED bulb feeling and arrows!
is a kit for advanced users, but if you master it, you will have a very wide range of road expression!

How to make it
1. Carefully cut out the parts from the support material using nippers or cutters so as not to damage the body.
2. Prepare the unevenness of the detached surface with a cutter or nippers.
3.Paint in the color of your choice! (Paint can be applied without primer, but if thin paint is to be used, surfacer or other primer is recommended.)
4.Insert the lens into the main body of the traffic light
5.Install joints for two-serialization and attachments for vertical installation on signals (Note:)
6.Install the signal body with pedestrian signals and attachments on the columns.
Note: When attaching the main body of the signal to the joint for the 2-series conversion, please shave 0.3mm off each side of the signal body, as it will not fit without modification.

MATSURI MODELS / Cityscape Studio 1/150 related products