Coin cell CR1220 constant light board : KEIGOO Electronic parts Non-scale 99030
KEIGOO Electronic Parts Non-scale
Attention
LEDs are sold separately. Please use in combination with our "bulb color, white, blue, green, yellow-green" with chip LED connectors.
For "Red, Yellow, Orange (2V lighting)" type, please turn down the brightness control volume to light up, otherwise the LEDs may be damaged or cause a fire.
Turn the brightness control knob slowly with the supplied screwdriver or the like.
The LED brightness can be infinitely adjusted from maximum to 20% of the light intensity with a range of motion of almost half a turn.
Note: Turning beyond the range of motion will damage the product.
Number of LED connection terminals 2
Approximate body size
35mm x 15mm x 8mm thickness
Uses 1 coin cell battery CR1220
Included accessories
Test battery 1 pc
Adjustment screwdriver (1 pc)
Information editing: Sakatsu Gallery
YouTube "Building a Woodland Rocky tavern kit" (video produced by Gumi Miniature)
Beginner-friendly No soldering required!
Easy connection by simply plugging in the connector.
of the same function.Coin cell CR2032 permanent light boardIt is smaller and can be installed anywhere. However, the batteries do not last long, so if you do not have a problem with the installation location, you can use theCoin cell CR2032 permanent light boardis recommended.
Coin Cell Substrate Series
Coin cell holder CR1220= small size first priority, no dimmer/switch, 1-2 hours on battery
Coin Cell Battery CR1220 Permanent Light Board= Small size, dimmer and switch available, 1-2 hours on battery
Coin cell CR2032 permanent light board= dimmer and switch available, 5-10 hours on battery
The power supply for LEDs "Coin cell battery CR1220 constant light board" is a battery holder for constant light LEDs to be built into dioramas, dollhouses, plastic models, etc. in a small space.
It has a brightness adjustment volume so you can adjust the brightness to your preference.
If you want to flash the LED, please combine it with the "Ultra-compact Controller" (sold separately).
recommended ultra-compact controller
candlelike
Hotaria parvula (species of firefly)
threadfin (any fish of family Polynemidae, esp. the striped threadfin, Polydactylus plebeius)
Ming Siu 0.5/0.5
Ming Kwan 1.0/1.0
obstacle light
Aeronautical Obstacle Light 2
recommended LEDs
1.6x0.8mm chip LED, bulb color, with connector
1.6x0.8mm chip LED, white, fluorescent color, with connector
1.6x0.8mm chip LED, red, with connector
1.6x0.8mm chip LED yellow with connector
1.6x0.8mm chip LED, green, with connector
1.6x0.8mm chip LED, blue, with connector
Other KEIGOO products
Attention
LEDs are sold separately. Please use in combination with our "bulb color, white, blue, green, yellow-green" with chip LED connectors.
For "Red, Yellow, Orange (2V lighting)" type, please turn down the brightness control volume to light up, otherwise the LEDs may be damaged or cause a fire.
Turn the brightness control knob slowly with the supplied screwdriver or the like.
The LED brightness can be infinitely adjusted from maximum to 20% of the light intensity with a range of motion of almost half a turn.
Note: Turning beyond the range of motion will damage the product.
Number of LED connection terminals 2
Approximate body size
35mm x 15mm x 8mm thickness
Uses 1 coin cell battery CR1220
Included accessories
Test battery 1 pc
Adjustment screwdriver (1 pc)
Information editing: Sakatsu Gallery
YouTube "Building a Woodland Rocky tavern kit" (video produced by Gumi Miniature)
Beginner-friendly No soldering required!
Easy connection by simply plugging in the connector.
of the same function.Coin cell CR2032 permanent light boardIt is smaller and can be installed anywhere. However, the batteries do not last long, so if you do not have a problem with the installation location, you can use theCoin cell CR2032 permanent light boardis recommended.
Coin Cell Substrate Series
Coin cell holder CR1220= small size first priority, no dimmer/switch, 1-2 hours on battery
Coin Cell Battery CR1220 Permanent Light Board= Small size, dimmer and switch available, 1-2 hours on battery
Coin cell CR2032 permanent light board= dimmer and switch available, 5-10 hours on battery
The power supply for LEDs "Coin cell battery CR1220 constant light board" is a battery holder for constant light LEDs to be built into dioramas, dollhouses, plastic models, etc. in a small space.
It has a brightness adjustment volume so you can adjust the brightness to your preference.
If you want to flash the LED, please combine it with the "Ultra-compact Controller" (sold separately).
recommended ultra-compact controller
candlelike
Hotaria parvula (species of firefly)
threadfin (any fish of family Polynemidae, esp. the striped threadfin, Polydactylus plebeius)
Ming Siu 0.5/0.5
Ming Kwan 1.0/1.0
obstacle light
Aeronautical Obstacle Light 2
recommended LEDs
1.6x0.8mm chip LED, bulb color, with connector
1.6x0.8mm chip LED, white, fluorescent color, with connector
1.6x0.8mm chip LED, red, with connector
1.6x0.8mm chip LED yellow with connector
1.6x0.8mm chip LED, green, with connector
1.6x0.8mm chip LED, blue, with connector
Other KEIGOO products
