Figure 8 Rail for Mini Mini Train : Yoshiaki Ishikawa Railway Track 9mm Gauge N(1:150)
Yoshiaki Ishikawa Figure of 8, very steep curve, very small rail N (1/150) size, about c1cm human height
Rail dimensions: approx. 20cm x 10cm (outer diameter), approx. 7cm x 5.5cm (inner diameter)
Note: In practice, it is necessary to place the buildings and other models in an area further away from the tracks to prevent the vehicles from hitting them when running.
Note Track width: 9mm (sleeper pitch: N)
[Caution]
The curved part is a curved rail with a very small radius. Due to the hand-worked nature of the product, there is some distortion.
Due to the steepness of the curve and the fact that rail powering is not considered, this product is not intended to be used with anything other than a battery-powered miniature train.
If the batteries are low, the train may slow down and stop at bends. If the train runs slowly, please replace the button battery.
The vehicles and photographic accessories shown in the photos are combination images and are not included in the product.
Information edit: Sakatsu Gallery
The flexible rail has been bent by Mr. Ishikawa himself into a very small rail with a figure 8 bend.
The compact horizontal size makes it fit perfectly into the "Collection Box Arch Deep Type" from Daiso.
You're welcome to try your hand at making your own super-small, adorable, fantastic diorama!
Caution]
The curve part is a curve rail of extremely small radius.
The curves are very small in radius.
Due to the steepness of the curve and the fact that rail powering is not considered, this product is not intended to be used with anything other than a battery-powered miniature train.
If the batteries are low, the miniature train may slow down and stop at the bends. If the speed is too slow, please replace the button battery.
The cars and photographic accessories in the picture are combination images and not included in the product.
There are also other works by Yoshiaki Ishikawa
Please take a look at our website.
Rail dimensions: approx. 20cm x 10cm (outer diameter), approx. 7cm x 5.5cm (inner diameter)
Note: In practice, it is necessary to place the buildings and other models in an area further away from the tracks to prevent the vehicles from hitting them when running.
Note Track width: 9mm (sleeper pitch: N)
[Caution]
The curved part is a curved rail with a very small radius. Due to the hand-worked nature of the product, there is some distortion.
Due to the steepness of the curve and the fact that rail powering is not considered, this product is not intended to be used with anything other than a battery-powered miniature train.
If the batteries are low, the train may slow down and stop at bends. If the train runs slowly, please replace the button battery.
The vehicles and photographic accessories shown in the photos are combination images and are not included in the product.
Information edit: Sakatsu Gallery
The flexible rail has been bent by Mr. Ishikawa himself into a very small rail with a figure 8 bend.
The compact horizontal size makes it fit perfectly into the "Collection Box Arch Deep Type" from Daiso.
You're welcome to try your hand at making your own super-small, adorable, fantastic diorama!
Caution]
The curve part is a curve rail of extremely small radius.
The curves are very small in radius.
Due to the steepness of the curve and the fact that rail powering is not considered, this product is not intended to be used with anything other than a battery-powered miniature train.
If the batteries are low, the miniature train may slow down and stop at the bends. If the speed is too slow, please replace the button battery.
The cars and photographic accessories in the picture are combination images and not included in the product.
There are also other works by Yoshiaki Ishikawa
Please take a look at our website.
