2.0x1.6mm chip LED fluorescent color with connectors, 2pcs : Sakatsu Electronic Parts Non-scale 2312
Electronic parts made by Sakatsu, non-scale
LED Standard
Chip size 2.0mm x 1.6mm (thickness is approx. 1.5mm including lead wires)
Appropriate voltage: 3V
Appropriate current: 10mA
DC only
Lead wire: approx. 23 cm long, red pin is positive, black is negative
Note: Specifications are subject to change without notice.
Features
Compared to light bulbs, LEDs are "power-saving," "long-lasting," and generate almost no heat, making them ideal for integration into models!
The size of the chip is larger than the conventional 1.6 x 0.8mm and the light is much brighter than the conventional 1.6 x 0.8mm.
The LEDs come with pins, so they can be used in combination with the Sakatsu LED system (dimming power supply for LEDs, basic circuit board, etc.) without soldering!
Information editing: Sakatsu Gallery
Our original chip LED.
The size of the LED chip is 2.0mmx1.6mm.Conventional LED (1.6mmx0.8mm)The light is larger and brighter than that of the
recommended if you need more light or size than usual.
If you want to make more light, please prepare the following "board" and "power supply".
"substrate"
Constant Light Basic Substrate
Dimmable Power Supply for LED
Flickering light Basic board
"Power"
Battery Case
AC adapter
"2.0x1.6mm LED series"
fluorescent lamp color
Electric Ball Color
LED Standard
Chip size 2.0mm x 1.6mm (thickness is approx. 1.5mm including lead wires)
Appropriate voltage: 3V
Appropriate current: 10mA
DC only
Lead wire: approx. 23 cm long, red pin is positive, black is negative
Note: Specifications are subject to change without notice.
Features
Compared to light bulbs, LEDs are "power-saving," "long-lasting," and generate almost no heat, making them ideal for integration into models!
The size of the chip is larger than the conventional 1.6 x 0.8mm and the light is much brighter than the conventional 1.6 x 0.8mm.
The LEDs come with pins, so they can be used in combination with the Sakatsu LED system (dimming power supply for LEDs, basic circuit board, etc.) without soldering!
Information editing: Sakatsu Gallery
Our original chip LED.
The size of the LED chip is 2.0mmx1.6mm.Conventional LED (1.6mmx0.8mm)The light is larger and brighter than that of the
recommended if you need more light or size than usual.
If you want to make more light, please prepare the following "board" and "power supply".
"substrate"
Constant Light Basic Substrate
Dimmable Power Supply for LED
Flickering light Basic board
"Power"
Battery Case
AC adapter
"2.0x1.6mm LED series"
fluorescent lamp color
Electric Ball Color
